TagLine Here
Equipment
Displaying 1 to 10 (of 10 Products)
| Item Name+ | Price | |
|---|---|---|
 |
1/8" x 1/8" Airbrush HoseAirbrush hose with 1/8" NPT fitting on both ends. This hose will fit Iwata and most import airbrushes and connect to a standard airbrush compressor. If you have an import airbrush and a standard shop type compressor, you will most likely need the hose with a 1/8" NPT on one end and a 1/4" NPT on the other end. This hose will not fit a Paasche airbrush. If you have any concerns that this is the correct hose to fit your airbrush or compressor, please contact the company where you bought your... |
$6.00 $2.00Save: 67% off |
 |
1oz Plastic bottle and cap 20/4101oz bottle with 20mm neck finish. Blast caps or a similar type of siphon lids will screw directly on to this bottle. Please check the cap that you will be using before purchasing to be sure the one you have will fit a 20/410 neck finish bottle. |
$0.30 |
 |
2oz Plastic bottle and cap 20/410 finish2oz bottle with 20mm neck finish. Blast caps or a similar type of siphon lids will screw directly on to this bottle. Please check the cap that you will be using before purchasing to be sure the one you have will fit a 20/410 neck finish bottle. |
$0.35 |
 |
Airbrush Quick DisconnectThis device will connect directly between the airbrush and hose allowing quick and easy changing of airbrushes. This is ideal when working with multiple airbrushes and fewer hoses. It's also great for speeding up your setup and breakdown. The air is sealed off at the hose when the airbrush is disconnected. The connections on the quick disconnect are 1/8" on both ends. Make sure your airbrush has a 1/8" connection before ordering. If not, you can pick up an adapter at your local home improvement... |
$4.00 |
 |
Badger Airbrush Hose AdapterThis adapter will allow you to use a standard 1/8" airbrush hose with your Badger airbrush. |
$3.00 $1.00Save: 67% off |
 |
Equipment Cleaner - 4 ozAirbrush tattoo ink cleaner is a cosmetic grade solution that is the perfect choice to clean your stencils and equipment and thinning the ink. For optimum thinning to maintain durability, we recommend using our Extender/Topcoat solution. (Remember that any thinning of the ink will affect coverage and durability.) The cleaning solution is available in 4 oz bottles only and is safe for your equipment. As with any cleaning product, gloves are recommended and always use in a well ventilated area.... |
$5.25 |
 |
Glass Supply BottleThese are 22cc airbrush supply bottles with a siphon lid. The glass bottle is re-useable and easy to clean. These bottles are designed to fit most bottom feed airbrushes. |
$2.25 |
 |
Paasche Airbrush Hose with 1/8" Connection10 foot airbrush hose with Paasche airbrush fitting on one end and 1/8" NPT fitting on the other end. This hose will fit a Paasche airbrush and connect to a standard airbrush compressor. This hose will only fit a Paasche airbrush. If you have any concerns that this is the correct hose to fit your airbrush or compressor, please contact the company where you bought your equipment to verify the connections or give us a call at 864-895-0870 and we'll try to help you figure it out. |
$6.00 $2.00Save: 67% off |
 |
Siphon Tip Covers (Set of 5)This is a set of 5 siphon tip covers for your airbrush supply bottles. Use these tip covers to slip over the tip of your airbrush supply bottles to help keep air out of the bottle while not in the airbrush. Tip covers are flexible and will fit over most supply bottle tips. |
$0.50 |
 |
Solid CapExtra solid caps for the 22cc glass or plastic supply bottles. |
$0.20 |
Displaying 1 to 10 (of 10 Products)