Equipment

Airbrush tattoo ink cleaner is a cosmetic grade solution that is the perfect choice to clean your stencils and equipment and thinning the ink. For optimum thinning to maintain durability, we recommend using our Extender/Topcoat solution. (Remember that any thinning of the ink will affect coverage and durability.) The cleaning solution is available in 4 oz bottles only and is safe for your equipment. As with any cleaning product, gloves are recommended and always use in a well ventilated area....

1oz bottle with 20mm neck finish. Blast caps or a similar type of siphon lids will screw directly on to this bottle. Please check the cap that you will be using before purchasing to be sure the one you have will fit a 20/410 neck finish bottle.

Airbrush hose with 1/8" NPT fitting on both ends. This hose will fit Iwata and most import airbrushes and connect to a standard airbrush compressor. If you have an import airbrush and a standard shop type compressor, you will most likely need the hose with a 1/8" NPT on one end and a 1/4" NPT on the other end. This hose will not fit a Paasche airbrush. If you have any concerns that this is the correct hose to fit your airbrush or compressor, please contact the company where you bought your...

This is a set of 5 siphon tip covers for your airbrush supply bottles. Use these tip covers to slip over the tip of your airbrush supply bottles to help keep air out of the bottle while not in the airbrush. Tip covers are flexible and will fit over most supply bottle tips.